M165 × 2 Metric Thread Dimensions
Nominal diameter 165 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 163.701 mm. Basic minor diameter: 162.835 mm. Basic major diameter: 165 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 163.701 | 163.861 |
| Minor | 162.835 | 163.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.038 | Not specified |
| Pitch | 163.739 | 163.939 |
| Minor | 162.873 | 163.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 163.701 | 163.901 |
| Minor | 162.835 | 163.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.038 | Not specified |
| Pitch | 163.739 | 163.989 |
| Minor | 162.873 | 163.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 163.701 | 163.951 |
| Minor | 162.835 | 163.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.038 | Not specified |
| Pitch | 163.739 | 164.054 |
| Minor | 162.873 | 163.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 163.701 | 164.016 |
| Minor | 162.835 | 163.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.038 | Not specified |
| Pitch | 163.739 | 164.139 |
| Minor | 162.873 | 163.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 163.701 | 164.101 |
| Minor | 162.835 | 163.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 164.682 | 164.962 |
| Pitch | 163.473 | 163.663 |
| Root d3 | 162.241 | 162.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 164.682 | 164.962 |
| Pitch | 163.545 | 163.663 |
| Root d3 | 162.313 | 162.508 |
Cutting tap preparation
Pre-drill recommendation: 163 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 164.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.