M145 × 4 Metric Thread Dimensions
Nominal diameter 145 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 142.402 mm. Basic minor diameter: 140.67 mm. Basic major diameter: 145 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 142.402 | 142.614 |
| Minor | 140.67 | 141.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.06 | Not specified |
| Pitch | 142.462 | 142.727 |
| Minor | 140.73 | 141.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 142.402 | 142.667 |
| Minor | 140.67 | 141.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.06 | Not specified |
| Pitch | 142.462 | 142.797 |
| Minor | 140.73 | 141.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 142.402 | 142.737 |
| Minor | 140.67 | 141.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.06 | Not specified |
| Pitch | 142.462 | 142.887 |
| Minor | 140.73 | 141.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 142.402 | 142.827 |
| Minor | 140.67 | 141.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.06 | Not specified |
| Pitch | 142.462 | 142.992 |
| Minor | 140.73 | 141.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 142.402 | 142.932 |
| Minor | 140.67 | 141.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 144.465 | 144.94 |
| Pitch | 142.092 | 142.342 |
| Root d3 | 139.628 | 140.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 144.465 | 144.94 |
| Pitch | 142.182 | 142.342 |
| Root d3 | 139.718 | 140.033 |
Cutting tap preparation
Pre-drill recommendation: 141 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 143.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.