M145 × 2 Metric Thread Dimensions
Nominal diameter 145 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 143.701 mm. Basic minor diameter: 142.835 mm. Basic major diameter: 145 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 143.701 | 143.861 |
| Minor | 142.835 | 143.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.038 | Not specified |
| Pitch | 143.739 | 143.939 |
| Minor | 142.873 | 143.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 143.701 | 143.901 |
| Minor | 142.835 | 143.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.038 | Not specified |
| Pitch | 143.739 | 143.989 |
| Minor | 142.873 | 143.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 143.701 | 143.951 |
| Minor | 142.835 | 143.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.038 | Not specified |
| Pitch | 143.739 | 144.054 |
| Minor | 142.873 | 143.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 143.701 | 144.016 |
| Minor | 142.835 | 143.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.038 | Not specified |
| Pitch | 143.739 | 144.139 |
| Minor | 142.873 | 143.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 143.701 | 144.101 |
| Minor | 142.835 | 143.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 144.682 | 144.962 |
| Pitch | 143.473 | 143.663 |
| Root d3 | 142.241 | 142.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 144.682 | 144.962 |
| Pitch | 143.545 | 143.663 |
| Root d3 | 142.313 | 142.508 |
Cutting tap preparation
Pre-drill recommendation: 143 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 144.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.