M145 × 3 Metric Thread Dimensions
Nominal diameter 145 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 143.051 mm. Basic minor diameter: 141.752 mm. Basic major diameter: 145 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 143.051 | 143.241 |
| Minor | 141.752 | 142.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.048 | Not specified |
| Pitch | 143.099 | 143.335 |
| Minor | 141.8 | 142.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 143.051 | 143.287 |
| Minor | 141.752 | 142.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.048 | Not specified |
| Pitch | 143.099 | 143.399 |
| Minor | 141.8 | 142.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 143.051 | 143.351 |
| Minor | 141.752 | 142.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.048 | Not specified |
| Pitch | 143.099 | 143.474 |
| Minor | 141.8 | 142.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 143.051 | 143.426 |
| Minor | 141.752 | 142.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145.048 | Not specified |
| Pitch | 143.099 | 143.574 |
| Minor | 141.8 | 142.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 145 | Not specified |
| Pitch | 143.051 | 143.526 |
| Minor | 141.752 | 142.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 144.577 | 144.952 |
| Pitch | 142.779 | 143.003 |
| Root d3 | 140.931 | 141.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 144.577 | 144.952 |
| Pitch | 142.863 | 143.003 |
| Root d3 | 141.015 | 141.271 |
Cutting tap preparation
Pre-drill recommendation: 142 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 143.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.