M120 × 6 Metric Thread Dimensions
Nominal diameter 120 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 116.103 mm. Basic minor diameter: 113.505 mm. Basic major diameter: 120 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 116.103 | 116.353 |
| Minor | 113.505 | 114.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.08 | Not specified |
| Pitch | 116.183 | 116.498 |
| Minor | 113.585 | 114.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 116.103 | 116.418 |
| Minor | 113.505 | 114.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.08 | Not specified |
| Pitch | 116.183 | 116.583 |
| Minor | 113.585 | 114.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 116.103 | 116.503 |
| Minor | 113.505 | 114.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.08 | Not specified |
| Pitch | 116.183 | 116.683 |
| Minor | 113.585 | 114.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 116.103 | 116.603 |
| Minor | 113.505 | 114.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.08 | Not specified |
| Pitch | 116.183 | 116.813 |
| Minor | 113.585 | 114.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 116.103 | 116.733 |
| Minor | 113.505 | 114.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 119.32 | 119.92 |
| Pitch | 115.723 | 116.023 |
| Root d3 | 112.027 | 112.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 119.32 | 119.92 |
| Pitch | 115.833 | 116.023 |
| Root d3 | 112.137 | 112.559 |
Cutting tap preparation
Pre-drill recommendation: 114 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 117.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.