M120 × 2 Metric Thread Dimensions
Nominal diameter 120 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 118.701 mm. Basic minor diameter: 117.835 mm. Basic major diameter: 120 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 118.701 | 118.861 |
| Minor | 117.835 | 118.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.038 | Not specified |
| Pitch | 118.739 | 118.939 |
| Minor | 117.873 | 118.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 118.701 | 118.901 |
| Minor | 117.835 | 118.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.038 | Not specified |
| Pitch | 118.739 | 118.989 |
| Minor | 117.873 | 118.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 118.701 | 118.951 |
| Minor | 117.835 | 118.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.038 | Not specified |
| Pitch | 118.739 | 119.054 |
| Minor | 117.873 | 118.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 118.701 | 119.016 |
| Minor | 117.835 | 118.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.038 | Not specified |
| Pitch | 118.739 | 119.139 |
| Minor | 117.873 | 118.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 118.701 | 119.101 |
| Minor | 117.835 | 118.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 119.682 | 119.962 |
| Pitch | 118.473 | 118.663 |
| Root d3 | 117.241 | 117.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 119.682 | 119.962 |
| Pitch | 118.545 | 118.663 |
| Root d3 | 117.313 | 117.508 |
Cutting tap preparation
Pre-drill recommendation: 118 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 119.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.