M120 × 3 Metric Thread Dimensions
Nominal diameter 120 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 118.051 mm. Basic minor diameter: 116.752 mm. Basic major diameter: 120 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 118.051 | 118.241 |
| Minor | 116.752 | 117.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.048 | Not specified |
| Pitch | 118.099 | 118.335 |
| Minor | 116.8 | 117.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 118.051 | 118.287 |
| Minor | 116.752 | 117.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.048 | Not specified |
| Pitch | 118.099 | 118.399 |
| Minor | 116.8 | 117.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 118.051 | 118.351 |
| Minor | 116.752 | 117.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.048 | Not specified |
| Pitch | 118.099 | 118.474 |
| Minor | 116.8 | 117.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 118.051 | 118.426 |
| Minor | 116.752 | 117.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120.048 | Not specified |
| Pitch | 118.099 | 118.574 |
| Minor | 116.8 | 117.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 120 | Not specified |
| Pitch | 118.051 | 118.526 |
| Minor | 116.752 | 117.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 119.577 | 119.952 |
| Pitch | 117.779 | 118.003 |
| Root d3 | 115.931 | 116.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 119.577 | 119.952 |
| Pitch | 117.863 | 118.003 |
| Root d3 | 116.015 | 116.271 |
Cutting tap preparation
Pre-drill recommendation: 117 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 118.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.