M72 × 1.5 Metric Thread Dimensions
Nominal diameter 72 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 71.026 mm. Basic minor diameter: 70.376 mm. Basic major diameter: 72 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72 | Not specified |
| Pitch | 71.026 | 71.158 |
| Minor | 70.376 | 70.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72.032 | Not specified |
| Pitch | 71.058 | 71.228 |
| Minor | 70.408 | 70.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72 | Not specified |
| Pitch | 71.026 | 71.196 |
| Minor | 70.376 | 70.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72.032 | Not specified |
| Pitch | 71.058 | 71.27 |
| Minor | 70.408 | 70.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72 | Not specified |
| Pitch | 71.026 | 71.238 |
| Minor | 70.376 | 70.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72.032 | Not specified |
| Pitch | 71.058 | 71.323 |
| Minor | 70.408 | 70.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72 | Not specified |
| Pitch | 71.026 | 71.291 |
| Minor | 70.376 | 70.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72.032 | Not specified |
| Pitch | 71.058 | 71.393 |
| Minor | 70.408 | 70.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72 | Not specified |
| Pitch | 71.026 | 71.361 |
| Minor | 70.376 | 70.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 71.732 | 71.968 |
| Pitch | 70.834 | 70.994 |
| Root d3 | 69.91 | 70.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 71.732 | 71.968 |
| Pitch | 70.894 | 70.994 |
| Root d3 | 69.97 | 70.128 |
Cutting tap preparation
Pre-drill recommendation: 70.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 71.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.