M72 × 1 Metric Thread Dimensions
Nominal diameter 72 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 71.35 mm. Basic minor diameter: 70.917 mm. Basic major diameter: 72 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72 | Not specified |
| Pitch | 71.35 | 71.468 |
| Minor | 70.917 | 71.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72.026 | Not specified |
| Pitch | 71.376 | 71.526 |
| Minor | 70.943 | 71.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72 | Not specified |
| Pitch | 71.35 | 71.5 |
| Minor | 70.917 | 71.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72.026 | Not specified |
| Pitch | 71.376 | 71.556 |
| Minor | 70.943 | 71.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72 | Not specified |
| Pitch | 71.35 | 71.53 |
| Minor | 70.917 | 71.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72.026 | Not specified |
| Pitch | 71.376 | 71.612 |
| Minor | 70.943 | 71.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 72 | Not specified |
| Pitch | 71.35 | 71.586 |
| Minor | 70.917 | 71.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 71.794 | 71.974 |
| Pitch | 71.184 | 71.324 |
| Root d3 | 70.568 | 70.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 71.794 | 71.974 |
| Pitch | 71.234 | 71.324 |
| Root d3 | 70.618 | 70.747 |
Cutting tap preparation
Pre-drill recommendation: 71 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 71.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.