M65 × 4 Metric Thread Dimensions
Nominal diameter 65 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 62.402 mm. Basic minor diameter: 60.67 mm. Basic major diameter: 65 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65 | Not specified |
| Pitch | 62.402 | 62.602 |
| Minor | 60.67 | 61.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65.06 | Not specified |
| Pitch | 62.462 | 62.712 |
| Minor | 60.73 | 61.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65 | Not specified |
| Pitch | 62.402 | 62.652 |
| Minor | 60.67 | 61.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65.06 | Not specified |
| Pitch | 62.462 | 62.777 |
| Minor | 60.73 | 61.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65 | Not specified |
| Pitch | 62.402 | 62.717 |
| Minor | 60.67 | 61.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65.06 | Not specified |
| Pitch | 62.462 | 62.862 |
| Minor | 60.73 | 61.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65 | Not specified |
| Pitch | 62.402 | 62.802 |
| Minor | 60.67 | 61.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65.06 | Not specified |
| Pitch | 62.462 | 62.962 |
| Minor | 60.73 | 61.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65 | Not specified |
| Pitch | 62.402 | 62.902 |
| Minor | 60.67 | 61.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.465 | 64.94 |
| Pitch | 62.106 | 62.342 |
| Root d3 | 59.642 | 60.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.465 | 64.94 |
| Pitch | 62.192 | 62.342 |
| Root d3 | 59.728 | 60.033 |
Cutting tap preparation
Pre-drill recommendation: 61 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 63.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.