M65 × 1.5 Metric Thread Dimensions
Nominal diameter 65 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 64.026 mm. Basic minor diameter: 63.376 mm. Basic major diameter: 65 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65 | Not specified |
| Pitch | 64.026 | 64.158 |
| Minor | 63.376 | 63.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65.032 | Not specified |
| Pitch | 64.058 | 64.228 |
| Minor | 63.408 | 63.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65 | Not specified |
| Pitch | 64.026 | 64.196 |
| Minor | 63.376 | 63.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65.032 | Not specified |
| Pitch | 64.058 | 64.27 |
| Minor | 63.408 | 63.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65 | Not specified |
| Pitch | 64.026 | 64.238 |
| Minor | 63.376 | 63.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65.032 | Not specified |
| Pitch | 64.058 | 64.323 |
| Minor | 63.408 | 63.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65 | Not specified |
| Pitch | 64.026 | 64.291 |
| Minor | 63.376 | 63.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65.032 | Not specified |
| Pitch | 64.058 | 64.393 |
| Minor | 63.408 | 63.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 65 | Not specified |
| Pitch | 64.026 | 64.361 |
| Minor | 63.376 | 63.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.732 | 64.968 |
| Pitch | 63.834 | 63.994 |
| Root d3 | 62.91 | 63.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 64.732 | 64.968 |
| Pitch | 63.894 | 63.994 |
| Root d3 | 62.97 | 63.128 |
Cutting tap preparation
Pre-drill recommendation: 63.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 64.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.