M5 × 0.5 Metric Thread Dimensions
Nominal diameter 5 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 4.675 mm. Basic minor diameter: 4.459 mm. Basic major diameter: 5 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5 | Not specified |
| Pitch | 4.675 | 4.738 |
| Minor | 4.459 | 4.549 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.02 | Not specified |
| Pitch | 4.695 | 4.775 |
| Minor | 4.479 | 4.591 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5 | Not specified |
| Pitch | 4.675 | 4.755 |
| Minor | 4.459 | 4.571 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.02 | Not specified |
| Pitch | 4.695 | 4.795 |
| Minor | 4.479 | 4.619 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5 | Not specified |
| Pitch | 4.675 | 4.775 |
| Minor | 4.459 | 4.599 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.02 | Not specified |
| Pitch | 4.695 | 4.82 |
| Minor | 4.479 | 4.659 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5 | Not specified |
| Pitch | 4.675 | 4.8 |
| Minor | 4.459 | 4.639 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.874 | 4.98 |
| Pitch | 4.58 | 4.655 |
| Root d3 | 4.272 | 4.367 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.874 | 4.98 |
| Pitch | 4.607 | 4.655 |
| Root d3 | 4.299 | 4.367 |
Cutting tap preparation
Pre-drill recommendation: 4.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 4.78 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.