M3 × 0.35 Metric Thread Dimensions
Nominal diameter 3 mm; pitch 0.35 mm.
Basic geometry
Basic pitch diameter: 2.773 mm. Basic minor diameter: 2.621 mm. Basic major diameter: 3 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3 | Not specified |
| Pitch | 2.773 | 2.829 |
| Minor | 2.621 | 2.684 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.019 | Not specified |
| Pitch | 2.792 | 2.863 |
| Minor | 2.64 | 2.72 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3 | Not specified |
| Pitch | 2.773 | 2.844 |
| Minor | 2.621 | 2.701 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.019 | Not specified |
| Pitch | 2.792 | 2.882 |
| Minor | 2.64 | 2.74 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3 | Not specified |
| Pitch | 2.773 | 2.863 |
| Minor | 2.621 | 2.721 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.896 | 2.981 |
| Pitch | 2.687 | 2.754 |
| Root d3 | 2.471 | 2.552 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.896 | 2.981 |
| Pitch | 2.712 | 2.754 |
| Root d3 | 2.496 | 2.552 |
Cutting tap preparation
Pre-drill recommendation: 2.65 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 2.85 mm. Approximate formation model. Estimated formation: 63.0%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.