M5.5 × 0.5 Metric Thread Dimensions
Nominal diameter 5.5 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 5.175 mm. Basic minor diameter: 4.959 mm. Basic major diameter: 5.5 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.5 | Not specified |
| Pitch | 5.175 | 5.238 |
| Minor | 4.959 | 5.049 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.52 | Not specified |
| Pitch | 5.195 | 5.275 |
| Minor | 4.979 | 5.091 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.5 | Not specified |
| Pitch | 5.175 | 5.255 |
| Minor | 4.959 | 5.071 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.52 | Not specified |
| Pitch | 5.195 | 5.295 |
| Minor | 4.979 | 5.119 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.5 | Not specified |
| Pitch | 5.175 | 5.275 |
| Minor | 4.959 | 5.099 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.52 | Not specified |
| Pitch | 5.195 | 5.32 |
| Minor | 4.979 | 5.159 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.5 | Not specified |
| Pitch | 5.175 | 5.3 |
| Minor | 4.959 | 5.139 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.374 | 5.48 |
| Pitch | 5.08 | 5.155 |
| Root d3 | 4.772 | 4.867 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 5.374 | 5.48 |
| Pitch | 5.107 | 5.155 |
| Root d3 | 4.799 | 4.867 |
Cutting tap preparation
Pre-drill recommendation: 5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 5.28 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.