M3.5 × 0.6 Metric Thread Dimensions
Nominal diameter 3.5 mm; pitch 0.6 mm.
Basic geometry
Basic pitch diameter: 3.11 mm. Basic minor diameter: 2.85 mm. Basic major diameter: 3.5 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.5 | Not specified |
| Pitch | 3.11 | 3.181 |
| Minor | 2.85 | 2.95 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.521 | Not specified |
| Pitch | 3.131 | 3.221 |
| Minor | 2.871 | 2.996 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.5 | Not specified |
| Pitch | 3.11 | 3.2 |
| Minor | 2.85 | 2.975 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.521 | Not specified |
| Pitch | 3.131 | 3.243 |
| Minor | 2.871 | 3.031 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.5 | Not specified |
| Pitch | 3.11 | 3.222 |
| Minor | 2.85 | 3.01 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.521 | Not specified |
| Pitch | 3.131 | 3.271 |
| Minor | 2.871 | 3.071 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.5 | Not specified |
| Pitch | 3.11 | 3.25 |
| Minor | 2.85 | 3.05 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.354 | 3.479 |
| Pitch | 3.004 | 3.089 |
| Root d3 | 2.635 | 2.743 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.354 | 3.479 |
| Pitch | 3.036 | 3.089 |
| Root d3 | 2.667 | 2.743 |
Cutting tap preparation
Pre-drill recommendation: 2.9 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 3.23 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.