M4 × 0.5 Metric Thread Dimensions
Nominal diameter 4 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 3.675 mm. Basic minor diameter: 3.459 mm. Basic major diameter: 4 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4 | Not specified |
| Pitch | 3.675 | 3.738 |
| Minor | 3.459 | 3.549 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.02 | Not specified |
| Pitch | 3.695 | 3.775 |
| Minor | 3.479 | 3.591 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4 | Not specified |
| Pitch | 3.675 | 3.755 |
| Minor | 3.459 | 3.571 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.02 | Not specified |
| Pitch | 3.695 | 3.795 |
| Minor | 3.479 | 3.619 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4 | Not specified |
| Pitch | 3.675 | 3.775 |
| Minor | 3.459 | 3.599 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.02 | Not specified |
| Pitch | 3.695 | 3.82 |
| Minor | 3.479 | 3.659 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4 | Not specified |
| Pitch | 3.675 | 3.8 |
| Minor | 3.459 | 3.639 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.874 | 3.98 |
| Pitch | 3.58 | 3.655 |
| Root d3 | 3.272 | 3.367 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 3.874 | 3.98 |
| Pitch | 3.607 | 3.655 |
| Root d3 | 3.299 | 3.367 |
Cutting tap preparation
Pre-drill recommendation: 3.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 3.78 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.