M2 × 0.4 Metric Thread Dimensions
Nominal diameter 2 mm; pitch 0.4 mm.
Basic geometry
Basic pitch diameter: 1.74 mm. Basic minor diameter: 1.567 mm. Basic major diameter: 2 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2 | Not specified |
| Pitch | 1.74 | 1.796 |
| Minor | 1.567 | 1.638 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.019 | Not specified |
| Pitch | 1.759 | 1.83 |
| Minor | 1.586 | 1.676 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2 | Not specified |
| Pitch | 1.74 | 1.811 |
| Minor | 1.567 | 1.657 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.019 | Not specified |
| Pitch | 1.759 | 1.849 |
| Minor | 1.586 | 1.698 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2 | Not specified |
| Pitch | 1.74 | 1.83 |
| Minor | 1.567 | 1.679 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.886 | 1.981 |
| Pitch | 1.654 | 1.721 |
| Root d3 | 1.408 | 1.49 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.886 | 1.981 |
| Pitch | 1.679 | 1.721 |
| Root d3 | 1.433 | 1.49 |
Cutting tap preparation
Pre-drill recommendation: 1.6 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 1.82 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.