M400 × 6 Metric Thread Dimensions
Nominal diameter 400 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 396.103 mm. Basic minor diameter: 393.505 mm. Basic major diameter: 400 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400 | Not specified |
| Pitch | 396.103 | 396.383 |
| Minor | 393.505 | 394.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400.08 | Not specified |
| Pitch | 396.183 | 396.538 |
| Minor | 393.585 | 394.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400 | Not specified |
| Pitch | 396.103 | 396.458 |
| Minor | 393.505 | 394.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400.08 | Not specified |
| Pitch | 396.183 | 396.633 |
| Minor | 393.585 | 394.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400 | Not specified |
| Pitch | 396.103 | 396.553 |
| Minor | 393.505 | 394.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400.08 | Not specified |
| Pitch | 396.183 | 396.743 |
| Minor | 393.585 | 394.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400 | Not specified |
| Pitch | 396.103 | 396.663 |
| Minor | 393.505 | 394.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400.08 | Not specified |
| Pitch | 396.183 | 396.893 |
| Minor | 393.585 | 394.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400 | Not specified |
| Pitch | 396.103 | 396.813 |
| Minor | 393.505 | 394.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 399.32 | 399.92 |
| Pitch | 395.688 | 396.023 |
| Root d3 | 391.992 | 392.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 399.32 | 399.92 |
| Pitch | 395.811 | 396.023 |
| Root d3 | 392.115 | 392.559 |
Cutting tap preparation
Pre-drill recommendation: 394 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 397.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.