M400 × 4 Metric Thread Dimensions
Nominal diameter 400 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 397.402 mm. Basic minor diameter: 395.67 mm. Basic major diameter: 400 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400 | Not specified |
| Pitch | 397.402 | 397.638 |
| Minor | 395.67 | 396.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400.06 | Not specified |
| Pitch | 397.462 | 397.762 |
| Minor | 395.73 | 396.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400 | Not specified |
| Pitch | 397.402 | 397.702 |
| Minor | 395.67 | 396.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400.06 | Not specified |
| Pitch | 397.462 | 397.837 |
| Minor | 395.73 | 396.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400 | Not specified |
| Pitch | 397.402 | 397.777 |
| Minor | 395.67 | 396.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400.06 | Not specified |
| Pitch | 397.462 | 397.937 |
| Minor | 395.73 | 396.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400 | Not specified |
| Pitch | 397.402 | 397.877 |
| Minor | 395.67 | 396.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400.06 | Not specified |
| Pitch | 397.462 | 398.062 |
| Minor | 395.73 | 396.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 400 | Not specified |
| Pitch | 397.402 | 398.002 |
| Minor | 395.67 | 396.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 399.465 | 399.94 |
| Pitch | 397.062 | 397.342 |
| Root d3 | 394.598 | 395.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 399.465 | 399.94 |
| Pitch | 397.162 | 397.342 |
| Root d3 | 394.698 | 395.033 |
Cutting tap preparation
Pre-drill recommendation: 396 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 398.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.