M390 × 6 Metric Thread Dimensions
Nominal diameter 390 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 386.103 mm. Basic minor diameter: 383.505 mm. Basic major diameter: 390 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390 | Not specified |
| Pitch | 386.103 | 386.383 |
| Minor | 383.505 | 384.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390.08 | Not specified |
| Pitch | 386.183 | 386.538 |
| Minor | 383.585 | 384.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390 | Not specified |
| Pitch | 386.103 | 386.458 |
| Minor | 383.505 | 384.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390.08 | Not specified |
| Pitch | 386.183 | 386.633 |
| Minor | 383.585 | 384.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390 | Not specified |
| Pitch | 386.103 | 386.553 |
| Minor | 383.505 | 384.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390.08 | Not specified |
| Pitch | 386.183 | 386.743 |
| Minor | 383.585 | 384.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390 | Not specified |
| Pitch | 386.103 | 386.663 |
| Minor | 383.505 | 384.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390.08 | Not specified |
| Pitch | 386.183 | 386.893 |
| Minor | 383.585 | 384.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390 | Not specified |
| Pitch | 386.103 | 386.813 |
| Minor | 383.505 | 384.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 389.32 | 389.92 |
| Pitch | 385.688 | 386.023 |
| Root d3 | 381.992 | 382.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 389.32 | 389.92 |
| Pitch | 385.811 | 386.023 |
| Root d3 | 382.115 | 382.559 |
Cutting tap preparation
Pre-drill recommendation: 384 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 387.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.