M390 × 4 Metric Thread Dimensions
Nominal diameter 390 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 387.402 mm. Basic minor diameter: 385.67 mm. Basic major diameter: 390 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390 | Not specified |
| Pitch | 387.402 | 387.638 |
| Minor | 385.67 | 386.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390.06 | Not specified |
| Pitch | 387.462 | 387.762 |
| Minor | 385.73 | 386.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390 | Not specified |
| Pitch | 387.402 | 387.702 |
| Minor | 385.67 | 386.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390.06 | Not specified |
| Pitch | 387.462 | 387.837 |
| Minor | 385.73 | 386.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390 | Not specified |
| Pitch | 387.402 | 387.777 |
| Minor | 385.67 | 386.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390.06 | Not specified |
| Pitch | 387.462 | 387.937 |
| Minor | 385.73 | 386.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390 | Not specified |
| Pitch | 387.402 | 387.877 |
| Minor | 385.67 | 386.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390.06 | Not specified |
| Pitch | 387.462 | 388.062 |
| Minor | 385.73 | 386.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 390 | Not specified |
| Pitch | 387.402 | 388.002 |
| Minor | 385.67 | 386.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 389.465 | 389.94 |
| Pitch | 387.062 | 387.342 |
| Root d3 | 384.598 | 385.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 389.465 | 389.94 |
| Pitch | 387.162 | 387.342 |
| Root d3 | 384.698 | 385.033 |
Cutting tap preparation
Pre-drill recommendation: 386 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 388.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.