M360 × 6 Metric Thread Dimensions
Nominal diameter 360 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 356.103 mm. Basic minor diameter: 353.505 mm. Basic major diameter: 360 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360 | Not specified |
| Pitch | 356.103 | 356.383 |
| Minor | 353.505 | 354.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360.08 | Not specified |
| Pitch | 356.183 | 356.538 |
| Minor | 353.585 | 354.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360 | Not specified |
| Pitch | 356.103 | 356.458 |
| Minor | 353.505 | 354.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360.08 | Not specified |
| Pitch | 356.183 | 356.633 |
| Minor | 353.585 | 354.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360 | Not specified |
| Pitch | 356.103 | 356.553 |
| Minor | 353.505 | 354.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360.08 | Not specified |
| Pitch | 356.183 | 356.743 |
| Minor | 353.585 | 354.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360 | Not specified |
| Pitch | 356.103 | 356.663 |
| Minor | 353.505 | 354.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360.08 | Not specified |
| Pitch | 356.183 | 356.893 |
| Minor | 353.585 | 354.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360 | Not specified |
| Pitch | 356.103 | 356.813 |
| Minor | 353.505 | 354.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 359.32 | 359.92 |
| Pitch | 355.688 | 356.023 |
| Root d3 | 351.992 | 352.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 359.32 | 359.92 |
| Pitch | 355.811 | 356.023 |
| Root d3 | 352.115 | 352.559 |
Cutting tap preparation
Pre-drill recommendation: 354 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 357.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.