M360 × 4 Metric Thread Dimensions
Nominal diameter 360 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 357.402 mm. Basic minor diameter: 355.67 mm. Basic major diameter: 360 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360 | Not specified |
| Pitch | 357.402 | 357.638 |
| Minor | 355.67 | 356.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360.06 | Not specified |
| Pitch | 357.462 | 357.762 |
| Minor | 355.73 | 356.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360 | Not specified |
| Pitch | 357.402 | 357.702 |
| Minor | 355.67 | 356.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360.06 | Not specified |
| Pitch | 357.462 | 357.837 |
| Minor | 355.73 | 356.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360 | Not specified |
| Pitch | 357.402 | 357.777 |
| Minor | 355.67 | 356.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360.06 | Not specified |
| Pitch | 357.462 | 357.937 |
| Minor | 355.73 | 356.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360 | Not specified |
| Pitch | 357.402 | 357.877 |
| Minor | 355.67 | 356.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360.06 | Not specified |
| Pitch | 357.462 | 358.062 |
| Minor | 355.73 | 356.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 360 | Not specified |
| Pitch | 357.402 | 358.002 |
| Minor | 355.67 | 356.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 359.465 | 359.94 |
| Pitch | 357.062 | 357.342 |
| Root d3 | 354.598 | 355.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 359.465 | 359.94 |
| Pitch | 357.162 | 357.342 |
| Root d3 | 354.698 | 355.033 |
Cutting tap preparation
Pre-drill recommendation: 356 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 358.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.