M350 × 6 Metric Thread Dimensions
Nominal diameter 350 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 346.103 mm. Basic minor diameter: 343.505 mm. Basic major diameter: 350 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350 | Not specified |
| Pitch | 346.103 | 346.368 |
| Minor | 343.505 | 344.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350.08 | Not specified |
| Pitch | 346.183 | 346.518 |
| Minor | 343.585 | 344.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350 | Not specified |
| Pitch | 346.103 | 346.438 |
| Minor | 343.505 | 344.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350.08 | Not specified |
| Pitch | 346.183 | 346.608 |
| Minor | 343.585 | 344.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350 | Not specified |
| Pitch | 346.103 | 346.528 |
| Minor | 343.505 | 344.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350.08 | Not specified |
| Pitch | 346.183 | 346.713 |
| Minor | 343.585 | 344.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350 | Not specified |
| Pitch | 346.103 | 346.633 |
| Minor | 343.505 | 344.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350.08 | Not specified |
| Pitch | 346.183 | 346.853 |
| Minor | 343.585 | 344.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350 | Not specified |
| Pitch | 346.103 | 346.773 |
| Minor | 343.505 | 344.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 349.32 | 349.92 |
| Pitch | 345.708 | 346.023 |
| Root d3 | 342.012 | 342.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 349.32 | 349.92 |
| Pitch | 345.823 | 346.023 |
| Root d3 | 342.127 | 342.559 |
Cutting tap preparation
Pre-drill recommendation: 344 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 347.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.