M350 × 4 Metric Thread Dimensions
Nominal diameter 350 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 347.402 mm. Basic minor diameter: 345.67 mm. Basic major diameter: 350 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350 | Not specified |
| Pitch | 347.402 | 347.638 |
| Minor | 345.67 | 346.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350.06 | Not specified |
| Pitch | 347.462 | 347.762 |
| Minor | 345.73 | 346.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350 | Not specified |
| Pitch | 347.402 | 347.702 |
| Minor | 345.67 | 346.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350.06 | Not specified |
| Pitch | 347.462 | 347.837 |
| Minor | 345.73 | 346.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350 | Not specified |
| Pitch | 347.402 | 347.777 |
| Minor | 345.67 | 346.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350.06 | Not specified |
| Pitch | 347.462 | 347.937 |
| Minor | 345.73 | 346.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350 | Not specified |
| Pitch | 347.402 | 347.877 |
| Minor | 345.67 | 346.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350.06 | Not specified |
| Pitch | 347.462 | 348.062 |
| Minor | 345.73 | 346.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 350 | Not specified |
| Pitch | 347.402 | 348.002 |
| Minor | 345.67 | 346.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 349.465 | 349.94 |
| Pitch | 347.062 | 347.342 |
| Root d3 | 344.598 | 345.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 349.465 | 349.94 |
| Pitch | 347.162 | 347.342 |
| Root d3 | 344.698 | 345.033 |
Cutting tap preparation
Pre-drill recommendation: 346 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 348.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.