M340 × 6 Metric Thread Dimensions
Nominal diameter 340 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 336.103 mm. Basic minor diameter: 333.505 mm. Basic major diameter: 340 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340 | Not specified |
| Pitch | 336.103 | 336.368 |
| Minor | 333.505 | 334.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340.08 | Not specified |
| Pitch | 336.183 | 336.518 |
| Minor | 333.585 | 334.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340 | Not specified |
| Pitch | 336.103 | 336.438 |
| Minor | 333.505 | 334.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340.08 | Not specified |
| Pitch | 336.183 | 336.608 |
| Minor | 333.585 | 334.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340 | Not specified |
| Pitch | 336.103 | 336.528 |
| Minor | 333.505 | 334.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340.08 | Not specified |
| Pitch | 336.183 | 336.713 |
| Minor | 333.585 | 334.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340 | Not specified |
| Pitch | 336.103 | 336.633 |
| Minor | 333.505 | 334.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340.08 | Not specified |
| Pitch | 336.183 | 336.853 |
| Minor | 333.585 | 334.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340 | Not specified |
| Pitch | 336.103 | 336.773 |
| Minor | 333.505 | 334.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 339.32 | 339.92 |
| Pitch | 335.708 | 336.023 |
| Root d3 | 332.012 | 332.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 339.32 | 339.92 |
| Pitch | 335.823 | 336.023 |
| Root d3 | 332.127 | 332.559 |
Cutting tap preparation
Pre-drill recommendation: 334 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 337.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.