M340 × 4 Metric Thread Dimensions
Nominal diameter 340 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 337.402 mm. Basic minor diameter: 335.67 mm. Basic major diameter: 340 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340 | Not specified |
| Pitch | 337.402 | 337.638 |
| Minor | 335.67 | 336.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340.06 | Not specified |
| Pitch | 337.462 | 337.762 |
| Minor | 335.73 | 336.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340 | Not specified |
| Pitch | 337.402 | 337.702 |
| Minor | 335.67 | 336.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340.06 | Not specified |
| Pitch | 337.462 | 337.837 |
| Minor | 335.73 | 336.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340 | Not specified |
| Pitch | 337.402 | 337.777 |
| Minor | 335.67 | 336.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340.06 | Not specified |
| Pitch | 337.462 | 337.937 |
| Minor | 335.73 | 336.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340 | Not specified |
| Pitch | 337.402 | 337.877 |
| Minor | 335.67 | 336.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340.06 | Not specified |
| Pitch | 337.462 | 338.062 |
| Minor | 335.73 | 336.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 340 | Not specified |
| Pitch | 337.402 | 338.002 |
| Minor | 335.67 | 336.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 339.465 | 339.94 |
| Pitch | 337.062 | 337.342 |
| Root d3 | 334.598 | 335.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 339.465 | 339.94 |
| Pitch | 337.162 | 337.342 |
| Root d3 | 334.698 | 335.033 |
Cutting tap preparation
Pre-drill recommendation: 336 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 338.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.