M330 × 6 Metric Thread Dimensions
Nominal diameter 330 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 326.103 mm. Basic minor diameter: 323.505 mm. Basic major diameter: 330 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330 | Not specified |
| Pitch | 326.103 | 326.368 |
| Minor | 323.505 | 324.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330.08 | Not specified |
| Pitch | 326.183 | 326.518 |
| Minor | 323.585 | 324.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330 | Not specified |
| Pitch | 326.103 | 326.438 |
| Minor | 323.505 | 324.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330.08 | Not specified |
| Pitch | 326.183 | 326.608 |
| Minor | 323.585 | 324.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330 | Not specified |
| Pitch | 326.103 | 326.528 |
| Minor | 323.505 | 324.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330.08 | Not specified |
| Pitch | 326.183 | 326.713 |
| Minor | 323.585 | 324.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330 | Not specified |
| Pitch | 326.103 | 326.633 |
| Minor | 323.505 | 324.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330.08 | Not specified |
| Pitch | 326.183 | 326.853 |
| Minor | 323.585 | 324.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330 | Not specified |
| Pitch | 326.103 | 326.773 |
| Minor | 323.505 | 324.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 329.32 | 329.92 |
| Pitch | 325.708 | 326.023 |
| Root d3 | 322.012 | 322.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 329.32 | 329.92 |
| Pitch | 325.823 | 326.023 |
| Root d3 | 322.127 | 322.559 |
Cutting tap preparation
Pre-drill recommendation: 324 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 327.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.