M330 × 4 Metric Thread Dimensions
Nominal diameter 330 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 327.402 mm. Basic minor diameter: 325.67 mm. Basic major diameter: 330 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330 | Not specified |
| Pitch | 327.402 | 327.638 |
| Minor | 325.67 | 326.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330.06 | Not specified |
| Pitch | 327.462 | 327.762 |
| Minor | 325.73 | 326.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330 | Not specified |
| Pitch | 327.402 | 327.702 |
| Minor | 325.67 | 326.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330.06 | Not specified |
| Pitch | 327.462 | 327.837 |
| Minor | 325.73 | 326.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330 | Not specified |
| Pitch | 327.402 | 327.777 |
| Minor | 325.67 | 326.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330.06 | Not specified |
| Pitch | 327.462 | 327.937 |
| Minor | 325.73 | 326.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330 | Not specified |
| Pitch | 327.402 | 327.877 |
| Minor | 325.67 | 326.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330.06 | Not specified |
| Pitch | 327.462 | 328.062 |
| Minor | 325.73 | 326.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 330 | Not specified |
| Pitch | 327.402 | 328.002 |
| Minor | 325.67 | 326.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 329.465 | 329.94 |
| Pitch | 327.062 | 327.342 |
| Root d3 | 324.598 | 325.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 329.465 | 329.94 |
| Pitch | 327.162 | 327.342 |
| Root d3 | 324.698 | 325.033 |
Cutting tap preparation
Pre-drill recommendation: 326 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 328.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.