M320 × 6 Metric Thread Dimensions
Nominal diameter 320 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 316.103 mm. Basic minor diameter: 313.505 mm. Basic major diameter: 320 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320 | Not specified |
| Pitch | 316.103 | 316.368 |
| Minor | 313.505 | 314.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320.08 | Not specified |
| Pitch | 316.183 | 316.518 |
| Minor | 313.585 | 314.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320 | Not specified |
| Pitch | 316.103 | 316.438 |
| Minor | 313.505 | 314.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320.08 | Not specified |
| Pitch | 316.183 | 316.608 |
| Minor | 313.585 | 314.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320 | Not specified |
| Pitch | 316.103 | 316.528 |
| Minor | 313.505 | 314.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320.08 | Not specified |
| Pitch | 316.183 | 316.713 |
| Minor | 313.585 | 314.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320 | Not specified |
| Pitch | 316.103 | 316.633 |
| Minor | 313.505 | 314.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320.08 | Not specified |
| Pitch | 316.183 | 316.853 |
| Minor | 313.585 | 314.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320 | Not specified |
| Pitch | 316.103 | 316.773 |
| Minor | 313.505 | 314.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 319.32 | 319.92 |
| Pitch | 315.708 | 316.023 |
| Root d3 | 312.012 | 312.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 319.32 | 319.92 |
| Pitch | 315.823 | 316.023 |
| Root d3 | 312.127 | 312.559 |
Cutting tap preparation
Pre-drill recommendation: 314 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 317.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.