M320 × 4 Metric Thread Dimensions
Nominal diameter 320 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 317.402 mm. Basic minor diameter: 315.67 mm. Basic major diameter: 320 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320 | Not specified |
| Pitch | 317.402 | 317.638 |
| Minor | 315.67 | 316.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320.06 | Not specified |
| Pitch | 317.462 | 317.762 |
| Minor | 315.73 | 316.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320 | Not specified |
| Pitch | 317.402 | 317.702 |
| Minor | 315.67 | 316.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320.06 | Not specified |
| Pitch | 317.462 | 317.837 |
| Minor | 315.73 | 316.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320 | Not specified |
| Pitch | 317.402 | 317.777 |
| Minor | 315.67 | 316.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320.06 | Not specified |
| Pitch | 317.462 | 317.937 |
| Minor | 315.73 | 316.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320 | Not specified |
| Pitch | 317.402 | 317.877 |
| Minor | 315.67 | 316.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320.06 | Not specified |
| Pitch | 317.462 | 318.062 |
| Minor | 315.73 | 316.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 320 | Not specified |
| Pitch | 317.402 | 318.002 |
| Minor | 315.67 | 316.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 319.465 | 319.94 |
| Pitch | 317.062 | 317.342 |
| Root d3 | 314.598 | 315.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 319.465 | 319.94 |
| Pitch | 317.162 | 317.342 |
| Root d3 | 314.698 | 315.033 |
Cutting tap preparation
Pre-drill recommendation: 316 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 318.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.