M310 × 6 Metric Thread Dimensions
Nominal diameter 310 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 306.103 mm. Basic minor diameter: 303.505 mm. Basic major diameter: 310 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310 | Not specified |
| Pitch | 306.103 | 306.368 |
| Minor | 303.505 | 304.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310.08 | Not specified |
| Pitch | 306.183 | 306.518 |
| Minor | 303.585 | 304.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310 | Not specified |
| Pitch | 306.103 | 306.438 |
| Minor | 303.505 | 304.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310.08 | Not specified |
| Pitch | 306.183 | 306.608 |
| Minor | 303.585 | 304.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310 | Not specified |
| Pitch | 306.103 | 306.528 |
| Minor | 303.505 | 304.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310.08 | Not specified |
| Pitch | 306.183 | 306.713 |
| Minor | 303.585 | 304.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310 | Not specified |
| Pitch | 306.103 | 306.633 |
| Minor | 303.505 | 304.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310.08 | Not specified |
| Pitch | 306.183 | 306.853 |
| Minor | 303.585 | 304.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310 | Not specified |
| Pitch | 306.103 | 306.773 |
| Minor | 303.505 | 304.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 309.32 | 309.92 |
| Pitch | 305.708 | 306.023 |
| Root d3 | 302.012 | 302.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 309.32 | 309.92 |
| Pitch | 305.823 | 306.023 |
| Root d3 | 302.127 | 302.559 |
Cutting tap preparation
Pre-drill recommendation: 304 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 307.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.