M310 × 4 Metric Thread Dimensions
Nominal diameter 310 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 307.402 mm. Basic minor diameter: 305.67 mm. Basic major diameter: 310 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310 | Not specified |
| Pitch | 307.402 | 307.638 |
| Minor | 305.67 | 306.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310.06 | Not specified |
| Pitch | 307.462 | 307.762 |
| Minor | 305.73 | 306.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310 | Not specified |
| Pitch | 307.402 | 307.702 |
| Minor | 305.67 | 306.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310.06 | Not specified |
| Pitch | 307.462 | 307.837 |
| Minor | 305.73 | 306.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310 | Not specified |
| Pitch | 307.402 | 307.777 |
| Minor | 305.67 | 306.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310.06 | Not specified |
| Pitch | 307.462 | 307.937 |
| Minor | 305.73 | 306.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310 | Not specified |
| Pitch | 307.402 | 307.877 |
| Minor | 305.67 | 306.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310.06 | Not specified |
| Pitch | 307.462 | 308.062 |
| Minor | 305.73 | 306.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 310 | Not specified |
| Pitch | 307.402 | 308.002 |
| Minor | 305.67 | 306.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 309.465 | 309.94 |
| Pitch | 307.062 | 307.342 |
| Root d3 | 304.598 | 305.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 309.465 | 309.94 |
| Pitch | 307.162 | 307.342 |
| Root d3 | 304.698 | 305.033 |
Cutting tap preparation
Pre-drill recommendation: 306 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 308.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.