M1.6 × 0.35 Metric Thread Dimensions
Nominal diameter 1.6 mm; pitch 0.35 mm.
Basic geometry
Basic pitch diameter: 1.373 mm. Basic minor diameter: 1.221 mm. Basic major diameter: 1.6 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.6 | Not specified |
| Pitch | 1.373 | 1.426 |
| Minor | 1.221 | 1.284 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.619 | Not specified |
| Pitch | 1.392 | 1.459 |
| Minor | 1.24 | 1.32 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.6 | Not specified |
| Pitch | 1.373 | 1.44 |
| Minor | 1.221 | 1.301 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.619 | Not specified |
| Pitch | 1.392 | 1.477 |
| Minor | 1.24 | 1.34 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.6 | Not specified |
| Pitch | 1.373 | 1.458 |
| Minor | 1.221 | 1.321 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.496 | 1.581 |
| Pitch | 1.291 | 1.354 |
| Root d3 | 1.075 | 1.152 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.496 | 1.581 |
| Pitch | 1.314 | 1.354 |
| Root d3 | 1.098 | 1.152 |
Cutting tap preparation
Pre-drill recommendation: 1.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 1.45 mm. Approximate formation model. Estimated formation: 63.0%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.