M295 × 6 Metric Thread Dimensions
Nominal diameter 295 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 291.103 mm. Basic minor diameter: 288.505 mm. Basic major diameter: 295 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295 | Not specified |
| Pitch | 291.103 | 291.368 |
| Minor | 288.505 | 289.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295.08 | Not specified |
| Pitch | 291.183 | 291.518 |
| Minor | 288.585 | 289.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295 | Not specified |
| Pitch | 291.103 | 291.438 |
| Minor | 288.505 | 289.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295.08 | Not specified |
| Pitch | 291.183 | 291.608 |
| Minor | 288.585 | 289.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295 | Not specified |
| Pitch | 291.103 | 291.528 |
| Minor | 288.505 | 289.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295.08 | Not specified |
| Pitch | 291.183 | 291.713 |
| Minor | 288.585 | 289.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295 | Not specified |
| Pitch | 291.103 | 291.633 |
| Minor | 288.505 | 289.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295.08 | Not specified |
| Pitch | 291.183 | 291.853 |
| Minor | 288.585 | 289.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295 | Not specified |
| Pitch | 291.103 | 291.773 |
| Minor | 288.505 | 289.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 294.32 | 294.92 |
| Pitch | 290.708 | 291.023 |
| Root d3 | 287.012 | 287.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 294.32 | 294.92 |
| Pitch | 290.823 | 291.023 |
| Root d3 | 287.127 | 287.559 |
Cutting tap preparation
Pre-drill recommendation: 289 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 292.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.