M295 × 4 Metric Thread Dimensions
Nominal diameter 295 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 292.402 mm. Basic minor diameter: 290.67 mm. Basic major diameter: 295 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295 | Not specified |
| Pitch | 292.402 | 292.638 |
| Minor | 290.67 | 291.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295.06 | Not specified |
| Pitch | 292.462 | 292.762 |
| Minor | 290.73 | 291.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295 | Not specified |
| Pitch | 292.402 | 292.702 |
| Minor | 290.67 | 291.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295.06 | Not specified |
| Pitch | 292.462 | 292.837 |
| Minor | 290.73 | 291.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295 | Not specified |
| Pitch | 292.402 | 292.777 |
| Minor | 290.67 | 291.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295.06 | Not specified |
| Pitch | 292.462 | 292.937 |
| Minor | 290.73 | 291.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295 | Not specified |
| Pitch | 292.402 | 292.877 |
| Minor | 290.67 | 291.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295.06 | Not specified |
| Pitch | 292.462 | 293.062 |
| Minor | 290.73 | 291.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 295 | Not specified |
| Pitch | 292.402 | 293.002 |
| Minor | 290.67 | 291.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 294.465 | 294.94 |
| Pitch | 292.062 | 292.342 |
| Root d3 | 289.598 | 290.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 294.465 | 294.94 |
| Pitch | 292.162 | 292.342 |
| Root d3 | 289.698 | 290.033 |
Cutting tap preparation
Pre-drill recommendation: 291 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 293.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.