M285 × 6 Metric Thread Dimensions
Nominal diameter 285 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 281.103 mm. Basic minor diameter: 278.505 mm. Basic major diameter: 285 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285 | Not specified |
| Pitch | 281.103 | 281.368 |
| Minor | 278.505 | 279.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285.08 | Not specified |
| Pitch | 281.183 | 281.518 |
| Minor | 278.585 | 279.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285 | Not specified |
| Pitch | 281.103 | 281.438 |
| Minor | 278.505 | 279.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285.08 | Not specified |
| Pitch | 281.183 | 281.608 |
| Minor | 278.585 | 279.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285 | Not specified |
| Pitch | 281.103 | 281.528 |
| Minor | 278.505 | 279.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285.08 | Not specified |
| Pitch | 281.183 | 281.713 |
| Minor | 278.585 | 279.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285 | Not specified |
| Pitch | 281.103 | 281.633 |
| Minor | 278.505 | 279.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285.08 | Not specified |
| Pitch | 281.183 | 281.853 |
| Minor | 278.585 | 279.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285 | Not specified |
| Pitch | 281.103 | 281.773 |
| Minor | 278.505 | 279.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 284.32 | 284.92 |
| Pitch | 280.708 | 281.023 |
| Root d3 | 277.012 | 277.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 284.32 | 284.92 |
| Pitch | 280.823 | 281.023 |
| Root d3 | 277.127 | 277.559 |
Cutting tap preparation
Pre-drill recommendation: 279 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 282.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.