M285 × 4 Metric Thread Dimensions
Nominal diameter 285 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 282.402 mm. Basic minor diameter: 280.67 mm. Basic major diameter: 285 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285 | Not specified |
| Pitch | 282.402 | 282.638 |
| Minor | 280.67 | 281.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285.06 | Not specified |
| Pitch | 282.462 | 282.762 |
| Minor | 280.73 | 281.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285 | Not specified |
| Pitch | 282.402 | 282.702 |
| Minor | 280.67 | 281.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285.06 | Not specified |
| Pitch | 282.462 | 282.837 |
| Minor | 280.73 | 281.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285 | Not specified |
| Pitch | 282.402 | 282.777 |
| Minor | 280.67 | 281.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285.06 | Not specified |
| Pitch | 282.462 | 282.937 |
| Minor | 280.73 | 281.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285 | Not specified |
| Pitch | 282.402 | 282.877 |
| Minor | 280.67 | 281.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285.06 | Not specified |
| Pitch | 282.462 | 283.062 |
| Minor | 280.73 | 281.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 285 | Not specified |
| Pitch | 282.402 | 283.002 |
| Minor | 280.67 | 281.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 284.465 | 284.94 |
| Pitch | 282.062 | 282.342 |
| Root d3 | 279.598 | 280.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 284.465 | 284.94 |
| Pitch | 282.162 | 282.342 |
| Root d3 | 279.698 | 280.033 |
Cutting tap preparation
Pre-drill recommendation: 281 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 283.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.