M275 × 4 Metric Thread Dimensions
Nominal diameter 275 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 272.402 mm. Basic minor diameter: 270.67 mm. Basic major diameter: 275 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275 | Not specified |
| Pitch | 272.402 | 272.638 |
| Minor | 270.67 | 271.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275.06 | Not specified |
| Pitch | 272.462 | 272.762 |
| Minor | 270.73 | 271.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275 | Not specified |
| Pitch | 272.402 | 272.702 |
| Minor | 270.67 | 271.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275.06 | Not specified |
| Pitch | 272.462 | 272.837 |
| Minor | 270.73 | 271.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275 | Not specified |
| Pitch | 272.402 | 272.777 |
| Minor | 270.67 | 271.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275.06 | Not specified |
| Pitch | 272.462 | 272.937 |
| Minor | 270.73 | 271.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275 | Not specified |
| Pitch | 272.402 | 272.877 |
| Minor | 270.67 | 271.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275.06 | Not specified |
| Pitch | 272.462 | 273.062 |
| Minor | 270.73 | 271.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275 | Not specified |
| Pitch | 272.402 | 273.002 |
| Minor | 270.67 | 271.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 274.465 | 274.94 |
| Pitch | 272.062 | 272.342 |
| Root d3 | 269.598 | 270.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 274.465 | 274.94 |
| Pitch | 272.162 | 272.342 |
| Root d3 | 269.698 | 270.033 |
Cutting tap preparation
Pre-drill recommendation: 271 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 273.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.