M275 × 3 Metric Thread Dimensions
Nominal diameter 275 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 273.051 mm. Basic minor diameter: 271.752 mm. Basic major diameter: 275 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275 | Not specified |
| Pitch | 273.051 | 273.263 |
| Minor | 271.752 | 272.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275.048 | Not specified |
| Pitch | 273.099 | 273.364 |
| Minor | 271.8 | 272.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275 | Not specified |
| Pitch | 273.051 | 273.316 |
| Minor | 271.752 | 272.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275.048 | Not specified |
| Pitch | 273.099 | 273.434 |
| Minor | 271.8 | 272.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275 | Not specified |
| Pitch | 273.051 | 273.386 |
| Minor | 271.752 | 272.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275.048 | Not specified |
| Pitch | 273.099 | 273.524 |
| Minor | 271.8 | 272.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275 | Not specified |
| Pitch | 273.051 | 273.476 |
| Minor | 271.752 | 272.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275.048 | Not specified |
| Pitch | 273.099 | 273.629 |
| Minor | 271.8 | 272.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 275 | Not specified |
| Pitch | 273.051 | 273.581 |
| Minor | 271.752 | 272.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 274.577 | 274.952 |
| Pitch | 272.753 | 273.003 |
| Root d3 | 270.905 | 271.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 274.577 | 274.952 |
| Pitch | 272.843 | 273.003 |
| Root d3 | 270.995 | 271.271 |
Cutting tap preparation
Pre-drill recommendation: 272 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 273.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.