M2.3 × 0.45 Metric Thread Dimensions
Nominal diameter 2.3 mm; pitch 0.45 mm.
Basic geometry
Basic pitch diameter: 2.008 mm. Basic minor diameter: 1.813 mm. Basic major diameter: 2.3 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.3 | Not specified |
| Pitch | 2.008 | 2.068 |
| Minor | 1.813 | 1.893 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.32 | Not specified |
| Pitch | 2.028 | 2.103 |
| Minor | 1.833 | 1.933 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.3 | Not specified |
| Pitch | 2.008 | 2.083 |
| Minor | 1.813 | 1.913 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.32 | Not specified |
| Pitch | 2.028 | 2.123 |
| Minor | 1.833 | 1.958 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.3 | Not specified |
| Pitch | 2.008 | 2.103 |
| Minor | 1.813 | 1.938 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.18 | 2.28 |
| Pitch | 1.917 | 1.988 |
| Root d3 | 1.64 | 1.728 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.18 | 2.28 |
| Pitch | 1.943 | 1.988 |
| Root d3 | 1.666 | 1.728 |
Cutting tap preparation
Pre-drill recommendation: 1.85 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 2.1 mm. Approximate formation model. Estimated formation: 65.4%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.