M2.3 × 0.4 Metric Thread Dimensions
Nominal diameter 2.3 mm; pitch 0.4 mm.
Basic geometry
Basic pitch diameter: 2.04 mm. Basic minor diameter: 1.867 mm. Basic major diameter: 2.3 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.3 | Not specified |
| Pitch | 2.04 | 2.096 |
| Minor | 1.867 | 1.938 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.319 | Not specified |
| Pitch | 2.059 | 2.13 |
| Minor | 1.886 | 1.976 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.3 | Not specified |
| Pitch | 2.04 | 2.111 |
| Minor | 1.867 | 1.957 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.319 | Not specified |
| Pitch | 2.059 | 2.149 |
| Minor | 1.886 | 1.998 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.3 | Not specified |
| Pitch | 2.04 | 2.13 |
| Minor | 1.867 | 1.979 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.186 | 2.281 |
| Pitch | 1.954 | 2.021 |
| Root d3 | 1.708 | 1.79 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.186 | 2.281 |
| Pitch | 1.979 | 2.021 |
| Root d3 | 1.733 | 1.79 |
Cutting tap preparation
Pre-drill recommendation: 1.9 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 2.12 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.