M12 × 1.25 Metric Thread Dimensions
Nominal diameter 12 mm; pitch 1.25 mm.
Basic geometry
Basic pitch diameter: 11.188 mm. Basic minor diameter: 10.647 mm. Basic major diameter: 12 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12 | Not specified |
| Pitch | 11.188 | 11.3 |
| Minor | 10.647 | 10.817 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12.028 | Not specified |
| Pitch | 11.216 | 11.356 |
| Minor | 10.675 | 10.887 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12 | Not specified |
| Pitch | 11.188 | 11.328 |
| Minor | 10.647 | 10.859 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12.028 | Not specified |
| Pitch | 11.216 | 11.396 |
| Minor | 10.675 | 10.94 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12 | Not specified |
| Pitch | 11.188 | 11.368 |
| Minor | 10.647 | 10.912 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12.028 | Not specified |
| Pitch | 11.216 | 11.44 |
| Minor | 10.675 | 11.01 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12 | Not specified |
| Pitch | 11.188 | 11.412 |
| Minor | 10.647 | 10.982 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12.028 | Not specified |
| Pitch | 11.216 | 11.496 |
| Minor | 10.675 | 11.1 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12 | Not specified |
| Pitch | 11.188 | 11.468 |
| Minor | 10.647 | 11.072 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11.76 | 11.972 |
| Pitch | 11.028 | 11.16 |
| Root d3 | 10.258 | 10.438 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11.76 | 11.972 |
| Pitch | 11.075 | 11.16 |
| Root d3 | 10.305 | 10.438 |
Cutting tap preparation
Pre-drill recommendation: 10.75 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 11.45 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.