M12 × 1 Metric Thread Dimensions
Nominal diameter 12 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 11.35 mm. Basic minor diameter: 10.917 mm. Basic major diameter: 12 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12 | Not specified |
| Pitch | 11.35 | 11.45 |
| Minor | 10.917 | 11.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12.026 | Not specified |
| Pitch | 11.376 | 11.501 |
| Minor | 10.943 | 11.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12 | Not specified |
| Pitch | 11.35 | 11.475 |
| Minor | 10.917 | 11.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12.026 | Not specified |
| Pitch | 11.376 | 11.536 |
| Minor | 10.943 | 11.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12 | Not specified |
| Pitch | 11.35 | 11.51 |
| Minor | 10.917 | 11.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12.026 | Not specified |
| Pitch | 11.376 | 11.576 |
| Minor | 10.943 | 11.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12 | Not specified |
| Pitch | 11.35 | 11.55 |
| Minor | 10.917 | 11.217 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12.026 | Not specified |
| Pitch | 11.376 | 11.626 |
| Minor | 10.943 | 11.318 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 12 | Not specified |
| Pitch | 11.35 | 11.6 |
| Minor | 10.917 | 11.292 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11.794 | 11.974 |
| Pitch | 11.206 | 11.324 |
| Root d3 | 10.59 | 10.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11.794 | 11.974 |
| Pitch | 11.249 | 11.324 |
| Root d3 | 10.633 | 10.747 |
Cutting tap preparation
Pre-drill recommendation: 11 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 11.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.