M11 × 1 Metric Thread Dimensions
Nominal diameter 11 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 10.35 mm. Basic minor diameter: 9.917 mm. Basic major diameter: 11 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11 | Not specified |
| Pitch | 10.35 | 10.445 |
| Minor | 9.917 | 10.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11.026 | Not specified |
| Pitch | 10.376 | 10.494 |
| Minor | 9.943 | 10.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11 | Not specified |
| Pitch | 10.35 | 10.468 |
| Minor | 9.917 | 10.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11.026 | Not specified |
| Pitch | 10.376 | 10.526 |
| Minor | 9.943 | 10.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11 | Not specified |
| Pitch | 10.35 | 10.5 |
| Minor | 9.917 | 10.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11.026 | Not specified |
| Pitch | 10.376 | 10.566 |
| Minor | 9.943 | 10.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11 | Not specified |
| Pitch | 10.35 | 10.54 |
| Minor | 9.917 | 10.217 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11.026 | Not specified |
| Pitch | 10.376 | 10.612 |
| Minor | 9.943 | 10.318 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11 | Not specified |
| Pitch | 10.35 | 10.586 |
| Minor | 9.917 | 10.292 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.794 | 10.974 |
| Pitch | 10.212 | 10.324 |
| Root d3 | 9.596 | 9.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.794 | 10.974 |
| Pitch | 10.253 | 10.324 |
| Root d3 | 9.637 | 9.747 |
Cutting tap preparation
Pre-drill recommendation: 10 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 10.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.