M11 × 0.75 Metric Thread Dimensions
Nominal diameter 11 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 10.513 mm. Basic minor diameter: 10.188 mm. Basic major diameter: 11 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11 | Not specified |
| Pitch | 10.513 | 10.598 |
| Minor | 10.188 | 10.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11.022 | Not specified |
| Pitch | 10.535 | 10.641 |
| Minor | 10.21 | 10.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11 | Not specified |
| Pitch | 10.513 | 10.619 |
| Minor | 10.188 | 10.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11.022 | Not specified |
| Pitch | 10.535 | 10.667 |
| Minor | 10.21 | 10.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11 | Not specified |
| Pitch | 10.513 | 10.645 |
| Minor | 10.188 | 10.378 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11.022 | Not specified |
| Pitch | 10.535 | 10.705 |
| Minor | 10.21 | 10.446 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 11 | Not specified |
| Pitch | 10.513 | 10.683 |
| Minor | 10.188 | 10.424 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.838 | 10.978 |
| Pitch | 10.391 | 10.491 |
| Root d3 | 9.929 | 10.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 10.838 | 10.978 |
| Pitch | 10.428 | 10.491 |
| Root d3 | 9.966 | 10.058 |
Cutting tap preparation
Pre-drill recommendation: 10.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 10.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.