M600 × 6 Metric Thread Dimensions
Nominal diameter 600 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 596.103 mm. Basic minor diameter: 593.505 mm. Basic major diameter: 600 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 600 | Not specified |
| Pitch | 596.103 | 596.383 |
| Minor | 593.505 | 594.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 600.08 | Not specified |
| Pitch | 596.183 | 596.538 |
| Minor | 593.585 | 594.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 600 | Not specified |
| Pitch | 596.103 | 596.458 |
| Minor | 593.505 | 594.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 600.08 | Not specified |
| Pitch | 596.183 | 596.633 |
| Minor | 593.585 | 594.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 600 | Not specified |
| Pitch | 596.103 | 596.553 |
| Minor | 593.505 | 594.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 600.08 | Not specified |
| Pitch | 596.183 | 596.743 |
| Minor | 593.585 | 594.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 600 | Not specified |
| Pitch | 596.103 | 596.663 |
| Minor | 593.505 | 594.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 600.08 | Not specified |
| Pitch | 596.183 | 596.893 |
| Minor | 593.585 | 594.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 600 | Not specified |
| Pitch | 596.103 | 596.813 |
| Minor | 593.505 | 594.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 599.32 | 599.92 |
| Pitch | 595.688 | 596.023 |
| Root d3 | 591.992 | 592.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 599.32 | 599.92 |
| Pitch | 595.811 | 596.023 |
| Root d3 | 592.115 | 592.559 |
Cutting tap preparation
Pre-drill recommendation: 594 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 597.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.