M580 × 6 Metric Thread Dimensions
Nominal diameter 580 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 576.103 mm. Basic minor diameter: 573.505 mm. Basic major diameter: 580 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 580 | Not specified |
| Pitch | 576.103 | 576.383 |
| Minor | 573.505 | 574.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 580.08 | Not specified |
| Pitch | 576.183 | 576.538 |
| Minor | 573.585 | 574.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 580 | Not specified |
| Pitch | 576.103 | 576.458 |
| Minor | 573.505 | 574.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 580.08 | Not specified |
| Pitch | 576.183 | 576.633 |
| Minor | 573.585 | 574.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 580 | Not specified |
| Pitch | 576.103 | 576.553 |
| Minor | 573.505 | 574.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 580.08 | Not specified |
| Pitch | 576.183 | 576.743 |
| Minor | 573.585 | 574.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 580 | Not specified |
| Pitch | 576.103 | 576.663 |
| Minor | 573.505 | 574.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 580.08 | Not specified |
| Pitch | 576.183 | 576.893 |
| Minor | 573.585 | 574.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 580 | Not specified |
| Pitch | 576.103 | 576.813 |
| Minor | 573.505 | 574.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 579.32 | 579.92 |
| Pitch | 575.688 | 576.023 |
| Root d3 | 571.992 | 572.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 579.32 | 579.92 |
| Pitch | 575.811 | 576.023 |
| Root d3 | 572.115 | 572.559 |
Cutting tap preparation
Pre-drill recommendation: 574 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 577.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.