M570 × 6 Metric Thread Dimensions
Nominal diameter 570 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 566.103 mm. Basic minor diameter: 563.505 mm. Basic major diameter: 570 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 570 | Not specified |
| Pitch | 566.103 | 566.383 |
| Minor | 563.505 | 564.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 570.08 | Not specified |
| Pitch | 566.183 | 566.538 |
| Minor | 563.585 | 564.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 570 | Not specified |
| Pitch | 566.103 | 566.458 |
| Minor | 563.505 | 564.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 570.08 | Not specified |
| Pitch | 566.183 | 566.633 |
| Minor | 563.585 | 564.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 570 | Not specified |
| Pitch | 566.103 | 566.553 |
| Minor | 563.505 | 564.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 570.08 | Not specified |
| Pitch | 566.183 | 566.743 |
| Minor | 563.585 | 564.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 570 | Not specified |
| Pitch | 566.103 | 566.663 |
| Minor | 563.505 | 564.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 570.08 | Not specified |
| Pitch | 566.183 | 566.893 |
| Minor | 563.585 | 564.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 570 | Not specified |
| Pitch | 566.103 | 566.813 |
| Minor | 563.505 | 564.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 569.32 | 569.92 |
| Pitch | 565.688 | 566.023 |
| Root d3 | 561.992 | 562.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 569.32 | 569.92 |
| Pitch | 565.811 | 566.023 |
| Root d3 | 562.115 | 562.559 |
Cutting tap preparation
Pre-drill recommendation: 564 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 567.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.