M550 × 6 Metric Thread Dimensions
Nominal diameter 550 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 546.103 mm. Basic minor diameter: 543.505 mm. Basic major diameter: 550 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 550 | Not specified |
| Pitch | 546.103 | 546.383 |
| Minor | 543.505 | 544.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 550.08 | Not specified |
| Pitch | 546.183 | 546.538 |
| Minor | 543.585 | 544.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 550 | Not specified |
| Pitch | 546.103 | 546.458 |
| Minor | 543.505 | 544.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 550.08 | Not specified |
| Pitch | 546.183 | 546.633 |
| Minor | 543.585 | 544.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 550 | Not specified |
| Pitch | 546.103 | 546.553 |
| Minor | 543.505 | 544.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 550.08 | Not specified |
| Pitch | 546.183 | 546.743 |
| Minor | 543.585 | 544.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 550 | Not specified |
| Pitch | 546.103 | 546.663 |
| Minor | 543.505 | 544.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 550.08 | Not specified |
| Pitch | 546.183 | 546.893 |
| Minor | 543.585 | 544.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 550 | Not specified |
| Pitch | 546.103 | 546.813 |
| Minor | 543.505 | 544.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 549.32 | 549.92 |
| Pitch | 545.688 | 546.023 |
| Root d3 | 541.992 | 542.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 549.32 | 549.92 |
| Pitch | 545.811 | 546.023 |
| Root d3 | 542.115 | 542.559 |
Cutting tap preparation
Pre-drill recommendation: 544 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 547.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.